AEG L 75480 FL Руководство пользователя - Страница 16
Просмотреть онлайн или скачать pdf Руководство пользователя для Стиральная машина AEG L 75480 FL. AEG L 75480 FL 32 страницы.
Также для AEG L 75480 FL: Руководство пользователя (32 страниц)
Печатать страницу16 www.aeg.com
5.
Press button
gramme. The indicator of button
is on.
The drain pump can operate for
a short time when the appliance
fills water.
The appliance adjust auto-
matically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximate-
ly 15 minutes from the start of
the programme, the display
shows the new time value.
8.4 Interrupt a programme
1.
Press button
flashes.
2.
Press button
programme continues.
8.5 Cancel a programme
1.
Press button
gramme and to deactivate the appli-
ance.
2.
Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
8.6 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
flashes.
2.
Change the function set.
8.7 Set the delay start
1.
Press button
til the display shows the number of
minutes or hours. The related sym-
bols comes on.
2.
Press button
starts the countdown of the delay
start.
4
to start the pro-
4
. The indicator
4
again. The washing
1
to cancel the pro-
1
again to activate
4
. The indicator
5
again and again un-
, the appliance
4
When the countdown is completed,
the programme starts automatically.
4
Before you press button
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.
8.8 Cancel the delay start
1.
Press button
tor flashes.
2.
Press button
til the display shows 0'.
3.
Press button
starts.
8.9 Open the door
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1.
Press button
symbol in the display goes off.
2.
Open the appliance door.
3.
Close the appliance door and press
button
4
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1.
Deactivate the appliance.
2.
Wait for some minutes.
3.
Make sure that no water is in
the drum.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
8.10 At the end of the
programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
• The indicator of the Start/Pause but-
ton
4
goes off.
4
4
. The related indica-
5
again and again un-
. The programme
4
4
. The door lock
. The programme or the
comes on.
to