Brother QL-800 Руководство по быстрой настройке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Изготовитель этикеток Brother QL-800. Brother QL-800 10 страниц. Dk label. dk tape
Также для Brother QL-800: Руководство по быстрой настройке (10 страниц), Руководство по безопасности продукции (11 страниц)

3. Loading the DK Roll

1. Make sure that the Label Printer is

turned Off. Hold the Label Printer

by the front, and firmly lift the DK

Roll Compartment Cover to open

it.

Remove the Protective Sheet from the

Label Output Slot.

IMPORTANT

• Do not throw away the Protective Sheet.

• When the Label Printer is not in use, lift the DK Roll Compartment Cover and

remove any DK Rolls from inside the Label Printer. Reinsert the protective sheet

into the Label Output Slot to maintain good printing quality.

2. Place the DK Roll into the Roll

Spool Guide.

• Make sure that the Roll Spool Arm is

inserted firmly in the Roll Spool Guide.

• Make sure the Stabilizer (1) slides into

the notch of the Label Printer.

3. Thread the DK Roll through the

Label Printer.

• Align the edge of the DK Roll with the

upright edge of the Label Output Slot.

• Insert the first label into the slot inside

the compartment.

• Push the label through the Label

Output Slot until the end reaches the

mark, as shown.

Protective

Sheet

3. Loading the DK Roll (cont)

4. Close the DK Roll Compartment Cover.

When you press the Power ( ) Button to turn the

Label Printer On, the end of the DK Roll aligns

automatically.

IMPORTANT

• Do not leave any printed labels in the Label Printer. Doing so will cause the labels

to jam.

• When not in use, close the DK Roll Compartment Cover to prevent dust and

debris from accumulating in the Label Printer.