Brother TJ-4520TN Руководство по настройке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по настройке для Изготовитель этикеток Brother TJ-4520TN. Brother TJ-4520TN 4 страницы. Label peeler module
Печатать страницу
4. Remove the Black Cap. Install the Roller Module in the slot, and fix the Screw
as illustrated (fastened by 0.74 N • m ± 0.10 N • m), and then insert the Black
Cap back into the slot.
NOTE
You must tighten the Screw to prevent the Roller Module from dislodging
when the Label Peeler is in use.
5. Make sure the AC Power Cord is disconnected from the AC power outlet
(electrical socket), and then plug the Label Peeler Module Cable into the Cable
Socket.
NOTE
• Secure the cable by affixing the Adhesive Hook onto the PCB side.
• DO NOT force the cable into the socket.
• Make sure you align the Label Peeler Module Cable's Connector with the
Cable Socket before plugging the Label Peeler Module Cable, as
illustrated.
6. Mount the Peeler Module by inserting both bolts into the Mounting Holes, as
illustrated.
7. Fasten the two Fixing Bolts and two Screws to secure the Label Peeler
Module, and then close the module's Front Cover (fastened by 0.74 Nɾm ±
0.10 Nɾm).