Fujitsu ETERNUS DX Disk Руководство по конфигурации - Страница 15

Chapter 8

Setting Up Oracle VM Server

Set up Oracle VM Server to connect the ETERNUS DX/AF.

The settings described in this chapter are performed using Oracle VM Manager. Prepare a Oracle VM Manager

environment before setting up Oracle VM Server. For details on how to install and operate Oracle VM Manag-

er, refer to the Oracle documents.

8.1

Setting Up the Fibre Channel Cards

Perform Fibre Channel card settings.

8.1.1

For Emulex Fibre Channel Cards

This section explains how to install Emulex Fibre Channel cards in the Oracle VM Server host and how to con-

nect the ETERNUS DX/AF.

Since the standard driver that is supplied with the OS is used for the Fibre Channel driver, other drivers do

not need to be installed.

Use the following procedure to set the drive parameters.

Use an editor such as "vi" to add the setting values to the configuration file.

Configuration file

•

Oracle VM Server 3.3

Oracle VM Server 3.2

Oracle VM Server 3.1

Note that the setting values and items vary depending on the ETERNUS DX/AF that is used.

Example:

•

options lpfc lpfc_lun_queue_depth=8 lpfc_link_speed=8 lpfc_topology=2

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86

Configuration file

Any file (.conf) in /etc/modprobe.d/

/etc/modprobe.conf

P3AM-6612-14ENZ0