Fujitsu PRIMERGY CX400 M1 Конфигуратор системы и справочник по заказам - Страница 10
Просмотреть онлайн или скачать pdf Конфигуратор системы и справочник по заказам для Сервер Fujitsu PRIMERGY CX400 M1. Fujitsu PRIMERGY CX400 M1 33 страницы.
Start PRIMERGY CX25y0 M2
II
Section
CX25y0 M2 Basic unit
CX2550 M2 System unit consisting of:
* 1U Half wide server node
- 1U Half wide tray
- Motherboard
- 2x PCIe Gen3 x16 riser card for low profile slot
- 1x UFM 8GB placement possible
- 1x SATADOM possible
- 1x correspoding cooling part (Air Cooling = Heatsinks / Liqiud Cooling = LC Kit) already included
CX2570 M2 System unit consisting of:
* 2U Half wide server node
- 2U Half wide tray
- Motherboard
- 2x PCIe Gen3 x16 riser card for low profile slot
- 2x PCIe Gen3 x16 riser card for GPGPU/Grid/XeonPhi
- 1x UFM 8GB placement possible
- 1x SATADOM possible
Systemboard D3343-B (same for CX2550 M2 and CX2570 M2) with:
* Two Xeon E5-2600 v4 4C, 6C, 8C, 10C, 12C, 14C, 16C, 18C, 20C & 22C CPU`s (Socket-R3)
with 2 serial QPI links ( Quick Path Interconnect ) and four memory channels per CPU
Two CPU has to be selected for an orderable basic unit,
* Chipset Intel® C610 (codenamed Wellsburg)
* 4 PCIe slots
-2x PCIe-3 x16 (Low Profile cards)
-2x PCIe-3 x16 (GPGPU/Grid/XeonPhi)
* 16 memory slots for max. 2,048GB RAM DDR4 available
- Memory is divided into 8 DIMMs per CPU ( 4 channels with 2 slots per channel )
Possible max. configurations are:
16x 128GB LRDIMM (8 rank modules) = 2,048GB
16x 32GB RDIMM (dual rank modules) = 512GB
First Memory ( one module ) has to be selected for an orderable basic unit per CPU
- Memory upgrade is possible module wise
- SDDC (Chipkill) is supported for memory modules,
* Dual Port 10/100/1000 x4 PCI Express* Gigabit Ethernet Intel LAN controller Powerville on-board
* iRMC S4 (integrated Remote Management Controller) on-board server management controller with
dedicated 10/100/1000 Service LAN-port and integrated graphics controller.
The Service LAN-port can be switched alternatively on standard Gbit LAN port 1
* Graphics Controller integrated in iRMC S4 (integrated Remote Management Controller):
1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz,
640x480x32bpp 85Hz
(1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
A
(Liquid Cooling can only support 1x PCIe Gen3)
Fujitsu Technology Solutions x86 PRIMERGY Server
System configurator and order-information guide
PRIMERGY CX400 M1
Status 2016-10-31
10 of 33