Fujitsu PRIMERGY Econel 200 S2 Дополнительное руководство по обслуживанию - Страница 11
Просмотреть онлайн или скачать pdf Дополнительное руководство по обслуживанию для Сервер Fujitsu PRIMERGY Econel 200 S2. Fujitsu PRIMERGY Econel 200 S2 39 страниц.
Печатать страницу
3
Safety notes
I
The following safety notes are also provided in the "Safety notes and
other important information.
This device complies with the relevant safety regulations for information
technology.
V
CAUTION!
The actions described in this manual should only be performed by
service personnel.
Before operating the device
V
CAUTION!
During installation and before operating the device, observe the
●
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
●
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
●
Transport the device in its original packaging or in other suitable
packaging which will protect it against shock or impact.
Installation and operation
V
CAUTION!
The server automatically sets itself to a voltage in the range of 100 V
●
to 240 V. Make sure that your local voltage is within this range.
●
This device has a specially approved power cable and must only be
connected to a grounded insulated socket.
Ensure that the power socket on the device or the grounded wall
●
outlet is freely accessible.
Econel 200 S2
Service Supplement
11