Fujitsu PRIMERGY RX350 S7 Конфигуратор системы и справочник по заказам - Страница 10
Просмотреть онлайн или скачать pdf Конфигуратор системы и справочник по заказам для Сервер Fujitsu PRIMERGY RX350 S7. Fujitsu PRIMERGY RX350 S7 36 страниц.
Печатать страницу
C
PRIMECENTER Rack
S26361-F2735-E285
RMK-F2_DI_CMA_QRL_LV
telescopic drop-in rail, full extr.
1-hand-mounting
RMK - 1 pair consisting of
- vario carrier length variable
with quick release lever support
- telescopic drop-in rails
with CMA adapter
1x per system
S26361-F4530-E12
Mounting systems higher 2U in
asymmetrical
racks
with 2U support bracket
S26361-F2735-E71
Lateral cable management
for 2U servers or higher
- for asymmetrical racks
PRIMECENTER S2 or M1
- 1 bracket PC Rack asym.
1x per system
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered
completely pre-mounted and
all wired connections are tested.
With PCR S2 12U, 24U, 38U and
PRC M1 16U, 24U, 42U:
Systems and components
will be delivered installed in the rack
With PCR S2 racks 46U:
Systems and components
will be delivered separately
To be ordered only together with
a PRIMECENTER rack
PCR S2 e.g. S26361-K826-V10x
new PCR M1 e.g. S26361-K827-Vxxx
refer PCR S2 or M1 rack configurator
max. 1x per System
D
S26361-F2735-E111
No Rackmount-Kit option
Only for loose deliveries
No mounting in racks possible
max. 1x per system
D
S26361-F4530-E10
Mounting in
symmetrical
racks
(no support bracket needed)
S26361-F2735-E82
2U cable management arm (CMA)
for 2U server or higher
- for symmetrical racks
M1 or 3rd party racks
Fujitsu racks
1x per system
PRIMERGY Classic 19" rack is not supported
For later conversion the following kits are available:
1.) Conversion kit 2 Floor -> Rack
Conversion PRIMERGY TX300 S7 base unit floorstand into
base unit rack. Only conversion, no mounting kit.
Mounting kit has to be ordered seperatly.
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX300 S7 / RX350 S7
S26361-F2735-L285
RMK-F2_DI_CMA_QRL_LV
for loose delivery
S26361-F2735-L31
Adapter angle PC/DC-Rack, till 200Kg
necessary for mounting RMKs in
asymmetrical racks
S26361-F2735-L7
Lateral cable management
can only be mounted
in asymmetrical PRIMECENTER
S2 or new M1 racks in 1U above RMK
Cable Management Arm (CMA) can
only be used for FTS RMKs with
CMA adapter
S26361-F2735-L82
Cable management arm for 2U Server
or higher for loose delivery
can only be mounted at RMK with
CMA adapter
for loose delivery
"Rack-mounting ex factory"
This service is to be ordered once
per installable server/storage
subsystem, in order to get the
server/storage subsystem
mounted into the racks.
In case of the 46 U PCR S2
this service has to be ordered,
to get the mounting kits and the
cables installed.
Status 2014-01-30
S26361-F1729-L260
10 of 36