Fujitsu Primergy TX300 S4 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сервер Fujitsu Primergy TX300 S4. Fujitsu Primergy TX300 S4 8 страниц. Pre-attached rack conversion kit
Также для Fujitsu Primergy TX300 S4: Руководство по конфигурированию системы и информации о заказах (17 страниц), Установка (3 страниц), Указания по использованию (4 страниц)

Hints for error handling

In preparation for a failure, set the following:

"Chapter 4 Operations after OS Installation"

- Set to collect memory dump

By setting to collect memory dump, debugging information is automatically saved when a STOP error (blue screen) or a hangup

occurs in the system. It helps to analyze the cause of errors.

- Create backup data for system recovery

After OS installation is complete, create backup data for system recovery. It enables the system to recover when any trouble oc-

curs.

For Windows Server 2008, back up whole server configuration to a shared folder on another server or a medium such as a DVD.

For Windows Server 2003, create the Automated System Recovery (ASR) set.

- Store system settings

By storing the BIOS setting information, the original information can be recovered with the stored information in case that the

setting information is lost. The stored information is also used for the system maintenance.

When the settings are completed, make sure to check notes before operation.

"4.5 Notes Before Operating the Server"

For details about maintenance after operations have started, refer to "User's Guide Chapter 8 Operation and

Maintenance".

Support and Service

l PRIMERGY information

For the latest information on PRIMERGY, update modules, drivers and the software, refer to the Fujitsu PRIMERGY web-

site (http://primergy.fujitsu.com).

Regarding BIOS and firmware, contact an office listed in the "Contact Information".

l Before requesting repairs

If an error occurs in this server, refer to "User's Guide 8.2 Troubleshooting".

If problems can still not be solved, contact an office listed in the "Contact Information".

When contacting the office listed in the "Contact Information", inform them of the product ID and manufactures number on

labels at the upper-right corner of the server.

��

Also read the points to note about requesting repairs beforehand in "User's Guide 8.8.1 Contacting Maintenance Support".

Print the "Configuration Sheets" – "Accident sheet" that is available from Fujitsu PRIMERGY website (http://

primergy.fujitsu.com) and enter the confirmed information.

��

�

��