Fujitsu SPARC Enterprise M4000 Руководство по началу работы - Страница 3
Просмотреть онлайн или скачать pdf Руководство по началу работы для Сервер Fujitsu SPARC Enterprise M4000. Fujitsu SPARC Enterprise M4000 4 страницы. Rci build procedure
Также для Fujitsu SPARC Enterprise M4000: Характеристики Руководство (30 страниц), Дополнительное руководство (36 страниц), Примечания к продукту (44 страниц)
Печатать страницу
Installation Task Map for SPARC Enterprise M4000/M5000 Servers
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
• Verify power, air conditioning, and floor area requirements. — Refer to the SPARC
Enterprise M4000/M5000 Servers Site Planning Guide and.
• Set up the equipment rack. — Refer to the SPARC Enterprise Equipment Rack Mounting
Guide.
• If your server was preinstalled in an equipment rack, proceed to Step 5 to connect your
console to a server.
• If your server needs to be rackmounted in an equipment rack, proceed to Step 4.
• Mount the server in the equipment rack. — Refer to the SPARC Enterprise Equipment Rack
Mounting Guide.
• Connect the console to a server. — Refer to the SPARC Enterprise M4000/M5000 Servers
Installation Guide.
• Connect the power cables— Refer to the SPARC Enterprise M4000/M5000 Servers
Installation Guide.
• Power on the power source (equipment rack). — Refer to the SPARC Enterprise M4000/
M5000 Servers Installation Guide.
• Prepare information for hardware configuration. - Refer to the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide.
• Power on the servers. Check that POST runs successfully on the eXtended system
control facility unit (XSCFU) and confirm there are no errors.— Refer to the SPARC
Enterprise M4000/M5000 Servers Installation Guide.
• Set up the XSCFU for network access. —Refer to the SPARC Enterprise M3000/M4000/
M5000/M8000/M9000 Servers Administration Guide
• If additional hardware or peripheral devices are to be installed into your server, proceed to
Step 12.
• If additional hardware or peripheral devices are not to be installed into the server, proceed to
Step 16.
• Turn off the power source (equipment rack). —Refer to the SPARC Enterprise M4000/
M5000 Servers Installation Guide.
• Install additional hardware or peripheral devices. Refer to the documentation that
came with the hardware or peripheral devices for details.
• Turn on the power source (equipment rack). — Refer to the SPARC Enterprise M4000/
M5000 Servers Installation Guide.
• Allow each domain to run through POST and confirm there are no errors.
• Check the network settings and connections. —Refer to the SPARC Enterprise M4000/
M5000 Servers Installation Guide.
• Confirm operation by using Oracle VTS. — Refer to the SPARC Enterprise M4000/M5000
Servers Installation Guide.
• Make the initial settings for each domain. —Refer to the SPARC Enterprise M3000/
M4000/M5000/M8000/M9000 Servers Administration Guide.
Notes:
We recommend you to install Enhanced System Facility (ESF) and apply PTF for safe
operation of the system. See the following website for details.
http://www.fujitsu.com/sparcenterprise/manual/
3