Fujitsu fi 5750C - Document Scanner Руководство по процедурам установки - Страница 9

Просмотреть онлайн или скачать pdf Руководство по процедурам установки для Сканер Fujitsu fi 5750C - Document Scanner. Fujitsu fi 5750C - Document Scanner 9 страниц. Image scanner
Также для Fujitsu fi 5750C - Document Scanner: Начало работы (40 страниц), Руководство по процедурам установки (7 страниц), Процедуры установки (3 страниц), Технические характеристики (2 страниц), Руководство по началу работы (42 страниц), Брошюра и технические характеристики (2 страниц), Руководство по эксплуатации (11 страниц), Инструкции по замене и очистке расходных материалов (19 страниц), Инструкции по очистке (2 страниц), Уборка и обслуживание (39 страниц), Инструкции по очистке (2 страниц)

Печатать страницу
Fujitsu fi 5750C - Document Scanner Руководство по процедурам установки
Fujitsu SCSI Scanner Installation Procedures
Use the appropriate cable to connect the scanner to the SCSI controller in your PC and
ensure that all connections are securely fastened. To identify the type of connector for
your model please consult the user manual or refer to the Scanner Hardware Interface
Specifications Web page.
Finally connect the power cord to the scanner and a wall outlet then turn on the scanner.
For those models without a power switch plug in the power supply to the back of the
scanner. To establish communication between the Scanner and your PC system turn on
the scanner prior to turning on your system. The scanner power and LED/LCD display
will light up. Next after the scanner completes its startup initialization the LED/LCD will
display either ready or the number one. This indicates that the scanner is ready.
Step G: Scanning with ScandAll 21.
1. Launch ScandAll 21 by clicking on the shortcut link on your desktop or manually by
clicking on Start, Programs, Scanner Utility for Microsoft Windows, then
ScandAll 21.
2. After the Untitled Screen has open, click on Scan and choose Select Source.
3. Select the Fujitsu Twain source for your scanner by Highlighting it and clicking
OK. You will only need to do this once unless you are scanning with multiple
sources.
4. Once you are back at the Untitled Screen click on Scan and select To View this
time. The Twain User Interface will popup.
5. Select the scanning parameters that you wish to use – Color mode, resolution,
paper size, etc...
6. Next under Scan Type choose either ADF or Flatbed in the dropdown box.
7. Place your document in the ADF or on the Flatbed face down and click on the Scan
button.
8. After the document is scanned close the Twain User Interface and the image will
appear on the Untitled Screen.
Congratulations! You have successfully completed and tested your scanner installation.
Step H: Installing third party software applications.
After you have successfully installed all the Fujitsu software and hardware, then it is time
to install any additional third party scanning software that you wish to use. Please follow
the software manufacturer's instructions for installation.
*If you do not have any unzipping software installed on your system, you can download a free
evaluation copy at www.winzip.com.
Rev051906A
Windows NT 4.0
Page 9 of 9