Fujitsu fi 5750C - Document Scanner Руководство по началу работы - Страница 16

Просмотреть онлайн или скачать pdf Руководство по началу работы для Сканер Fujitsu fi 5750C - Document Scanner. Fujitsu fi 5750C - Document Scanner 42 страницы. Image scanner
Также для Fujitsu fi 5750C - Document Scanner: Начало работы (40 страниц), Руководство по процедурам установки (7 страниц), Руководство по процедурам установки (9 страниц), Процедуры установки (3 страниц), Технические характеристики (2 страниц), Брошюра и технические характеристики (2 страниц), Руководство по эксплуатации (11 страниц), Инструкции по замене и очистке расходных материалов (19 страниц), Инструкции по очистке (2 страниц), Уборка и обслуживание (39 страниц), Инструкции по очистке (2 страниц)

Печатать страницу
Fujitsu fi 5750C - Document Scanner Руководство по началу работы
You can change the overlay on the opeartor
panel according to your language.
Name
Function No. display
Buttons
Function
Send to
Scan
LED
Power
For details, refer to the "FUJITSU TWAIN32
Scanner Driver User's Guide", provided in the
User Manual CD-ROM, and the "fi-5750C
Operator's guide", provided in the Setup CD-
ROM.
1-4
TABLE 5.
Function
Indicates the function No.
and error status.
Changes the Function
activated by the Send to
button .
Launches the linked
application software
Lights when the scanner
is turned ON.
Indications on the
Function No. display
The following shows the indications on the
Function No. display.
•
8
Blinks only one time upon turning on the scanner.
•
P
Indicates that the scanner has been turned ON and is
being initialized.
•
0
Indicates that initialization will soon be completed.
•
1
Indicates that initialization has been completed
successfully.
This status is called "Ready Status".
•
U
Indicates that a temporary error (that users can solve)
has occurred during the initialization or scanning of
documents.
"U" and an error number (0, 1, 2, 4) are displayed
alternately. To return the scanner to the ready status
("1"), press the "Scan" or "Send to" button while the
error is indicated.
•
E
Indicates that a device alarm (that users cannot solve)
has occurred during the initialization or scanning of
documents.
"E" and an "alarm code" (a number or letter) are
indicated alternately. To return the scanner to the
ready status ("1"), press "Scan" or "Send to" button
while the alarm is indicated.
If this alarm occurs, turn the power off and then on
again. If the alarm is indicated after turning on the
power again, contact an authorized FUJITSU scanner
service provider.