Brother MFC-8870DW Руководство по подключению - Страница 3

Просмотреть онлайн или скачать pdf Руководство по подключению для Факсимильный аппарат Brother MFC-8870DW. Brother MFC-8870DW 5 страниц. Vista network connection repair instructions
Также для Brother MFC-8870DW: Руководство (7 страниц), Руководство по подключению (4 страниц)

Печатать страницу

Brother MFC-8870DW Руководство по подключению

MFC8870DW Windows 7 Network Connection Repair Instructions

PART 6: VERIFY THAT THE PRINTER STATUS IS READY AND THE PRINT QUEUE IS EMPTY

1. While in the Printer folder, locate the Brother "Printer Driver" in the list and hover your mouse

over the icon. Below is an example of what you may see:

Status: 0 document(s) in queue (It could be any number)

Status: Printer: Ready (It could also state: Offline, Paused, etc.)

2. If the Status states: Paused:

a. Right-click on the Brother "Printer Driver" and select See What's Printing.

b. Select Printer.

If there is a check next to Pause Printing, click it again to uncheck the selection.

d. If there are documents waiting in the queue, and they begin to print, then the issue is resolved.

Otherwise, continue troubleshooting.

3. If there are any documents waiting in the queue:

1. Right-click on the Brother "Printer Driver" and select See What's Printing.

2. Select Printer => Cancel All Documents.

3. Press Yes. This should clear the queue.

NOTE: You may have to make several attempts to completely clear the print queue.

PART 7: VERIFY PRINT PROCESSOR

1. While in the Printer folder, right click on the Brother "Printer Driver" and left click on Printer

Properties.

2. Click on the Advanced Tab.

3. Click the Print Processor button.

4. Under Print Processor, ensure Winprint is selected.

5. Under Default Data type, make sure RAW is selected.

6. Click OK.

7. Under the Advanced Tab, uncheck Keep printed documents if applicable.

8. Click APPLY => OK.

PART 8: ATTEMPT A TEST PRINT

1. While in the Printer folder, right-click on the Brother "Printer Driver" and select Printer

Properties, if it is not already open.

2. On the General Tab, click the Print Test Page button.

a. If the test page prints, then your issue is resolved.

b. If the test page does not print, close the Printer Properties window.

Right-click on the Brother "Printer Driver" and select See What's Printing.

d. Select Printer => Cancel All Documents.

e. Press Yes. This should clear the queue. Continue troubleshooting.

NOTE: You may have to make several attempts to completely clear the print queue.