Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Сканер Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain. Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain 26 страниц. Windows 95\98\98se\me\2000\xp\vista
Также для Fujitsu FI-6770A - Clr Dupl 70PPM/140IPM Ultra SCSI A3 Twain: Руководство по процедурам установки (6 страниц), Инструкции по замене и очистке расходных материалов (22 страниц)
Печатать страницу
■ Flatbed type
Name
Check LED
Function Number Display
[Function] button
[Send to] button
[Scan/Stop] button
[Power] button
/Power LED
■ Indications on the Function Number Display
Indication
8
Blinks only one time upon turning on the scanner.
P
Indicates that the scanner has been turned ON and is being initialized.
1
Indicates that the scanner is ready for scanning.
This means initialization has ended successfully after power-on. This status is called "Ready
Status."
J
Indicates that a recoverable error occurred during scanning with the scanner.
U
"J" or "U" and an "error number" are displayed alternately.
For details of the errors, refer to "Temporary Errors" in the Operator's Guide.
After the error has been resolved, you can return to the Ready Status (see "1" above) by
pressing the [Scan/Stop] or [Send to] button.
E
Indicates that an abnormality (device error) occurred in the scanner during its initialization or
F
during scanning documents.
C
"E", "F", "C", "H", "A", or "L" and an "error number" are displayed alternately. When the error
H
number is displayed, turn the Main Power Switch OFF and then ON again. If the error persists
A
after this, contact the dealer where you purchased the scanner or an authorized FUJITSU
scanner service provider.
L
Check
Check LED
Function Number Display
Function
[Function] button
Send to
[Send to] button
Scan / Stop
[Scan/Stop] button
Power
[Power] button/Power LED
Lights (in orange) when an error occurs.
Indicates the scanner status.
Switches the function activated by the [Send to] button.
Launches linked application software for scanning.
Resets an error indication.
Launches linked application software for scanning.
Resets an error indication.
Cancels ongoing scanning.
Turns the scanner ON and OFF.
Lights (in green) when the scanner is turned ON.
Function
Description
1 Preparation
11