Fujitsu fi-6800 Инструкции по замене и очистке расходных материалов - Страница 21

Просмотреть онлайн или скачать pdf Инструкции по замене и очистке расходных материалов для Сканер Fujitsu fi-6800. Fujitsu fi-6800 26 страниц. Image scanner
Также для Fujitsu fi-6800: Технические характеристики (2 страниц), Руководство по началу работы (8 страниц), Руководство по началу работы (8 страниц), Руководство по началу работы (9 страниц), Технические характеристики (4 страниц), Удобное управление (24 страниц), Начало работы (6 страниц)

LEANING THE

LASS

REAS

Dirty Glass Areas can cause vertical streaks in the scanned image. It is

very important to keep these areas free of paper dust, ink and toner.

•

Clean the Glass Areas on the upper side of the ADF with a lint free

cloth.

Removable Glass

Non-Removable Glass

Note:

Under normal conditions the Removable Glass assembly should not

have to be removed. If there is a large amount of paper dust in the

scanner and the scanned images continue to have vertical streaks,

follow the directions below to clean behind the glass.

•

Loosen the screw on the Glass

Assembly. This is a captive

screw so it will not come free.

•

Tilt the Glass to the angle shown

on the right.

•

Remove the Glass as you slide it

to the right.

•

Clean the backside of the glass

you removed with a lint free

cloth.

•

Using a cotton swab, clean the

glass inside the area where the

Glass was removed.

•

Reinstall the Glass Assembly.

fi-6800 C

ONSUMABLE

EPLACEMENT AND

Glass

LEANING

NSTRUCTIONS