Fujitsu fi-680PRB Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сканер Fujitsu fi-680PRB. Fujitsu fi-680PRB 26 страниц. Imprinter
Печатать страницу
Chapter 1 Preparations
This chapter describes the features, part names and functions of the Imprinter.
1.1 Features
With the Imprinter installed in the scanner, you can print an alphanumerical string on a document scanned with the
ADF.
This feature helps you to organize the scanned document with a name, date, or a serial number printed on it.
The Front-Side Imprinter prints a character string on the front of a document, and the Back-Side Imprinter on the back.
A Front-Side Imprinter and a Back-Side Imprinter can be installed in the scanner at the same time.
！
！ ！
However, you cannot print with both Imprinters simultaneously. Specify either Imprinter, depending on the intended use.
1.2 Parts Names and Functions
This section describes the names and functions of Imprinter parts.
For the names and functions of scanner parts, refer to the "fi-6400/fi-6800 Image Scanner Operator's Guide".
■ External View
When the Front-Side Imprinter is installed
When the Back-Side Imprinter is installed
1
Top Cover
This is a cover above the paper output.
Open the top cover when you remove a paper jam,
clean inside the ADF, or replace a print cartridge.
1
2
Top Cover Release Tab
2
Push up the release tab to open the top cover.
3
Output Feeder Unit
3
Open the unit when you replace a print cartridge in
4
the Front-Side Imprinter, or adjust the print start
position.
4
Operator Panel
The operator panel consists of the LCD (Liquid
5
Crystal Display), operation buttons, and an LED.
With the operator panel, you operate the scanner or
6
check the scanner status.
7
5
Power Button
Use the power button to turn the scanner on or off.
8
6
ADF Release Tab
Push up the release tab to open the ADF.
7
ADF
9
The ADF feeds the document set in the hopper into
the scanner sheet by sheet.
Open the ADF when you replace consumables or
10
clean inside the scanner.
8
Hopper
This is a rack into which a document to be scanned
is set.
9
Back-Side Imprinter Cover
Open the cover when you replace a print cartridge
in the Back-Side Imprinter, or adjust the print start
position.
10
Top Cover (when the Back-Side Imprinter is
installed)
This is a cover above the paper output.
Open the top cover when you remove a paper jam,
clean inside the ADF, or replace a print cartridge.
8