Fujitsu fi-8150 Руководство по эксплуатации - Страница 21
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сканер Fujitsu fi-8150. Fujitsu fi-8150 47 страниц. Image scanner
Также для Fujitsu fi-8150: Начало работы (2 страниц), Начало работы (2 страниц)
Печатать страницу
For fi-8150/fi-8150U
1
Turn off the scanner if it is on.
2
On the operator panel, hold down the [Function] button and press the [Power] button.
Keep holding down the [Function] button.
3
When "b" is displayed after "P" in the Function Number Display, release the [Function] button.
4
Load blank documents in the scanner.
When you load one blank document, you can check the result of Print Pattern 1 only.
Load multiple blank documents to check the results of some print patterns.
For details about print patterns, refer to
HINT
● Use an A4 or Letter size blank sheet.
If the paper size is smaller than A4 or Letter, printing may not complete successfully.
● Make sure that the print cartridge holder is positioned within the document width.
5
Press the [Scan/Stop] button.
One blank sheet is fed into the scanner, and the imprinter will print out a print pattern leaving a 5 mm gap
(with an allowance of 4 mm inwards or outwards) from the edge of the document.
Print Patterns and the Results (page
21
Installation
22).