Fujitsu M3093EX Руководство по эксплуатации - Страница 24

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сканер Fujitsu M3093EX. Fujitsu M3093EX 50 страниц. Departmental document scanner
Также для Fujitsu M3093EX: Брошюра (2 страниц), Процедуры установки (3 страниц), Брошюра и технические характеристики (2 страниц), Инструкция по очистке Руководство (12 страниц)

4.3 Reading Documents in ADF Mode

This section explains how to read documents using the automatic

document feeder. If the following steps are not closely followed, a

feed error may occur.

(a) Paper quality

(b) Paper weight

(d) Items to avoid

NOTICE: The important document which shall not be torn must be read by flatbet.

NOTICE: Carbonless papers have the chemical composition which damages the pad and

pickroller. Therefore, note the following remarks

Cleaning:

Replacement of parts: The life of the pad and the pickroller may be shorter than the

Check the documents as follows:

• Wood-free paper.

• PPC paper; Specified by XEROX Corporation.

• 13.91bs to 27.81bs

• Letter, Legal, A4, A5, B5

• The following documents may be hard to read by ADF. Before

you start the large quantity reading, check that the document is

read appropriately. If the reading is not appropriate, read them

by flatbet.

– Paper with a clip or staple.

– Paper that has ink which is not dry.

– Paper thickness is not constant, such as an envelope.

– Paper that has large rumples or curl. (See NOTICE)

– Paper that has folds or tears.

– Tracing paper.

– Coating paper.

– Carbon paper.

– Paper that is smaller than A5 size or larger than A4 width.

– Items other than paper, such as clothes, metal sheet, or OHP

film.

– Photographic paper.

– Paper that has perforations on its side.

– Paper that has a shape other than square.

– Paper that is very thin.

If the miss pick occurs frequently, clean the pad and pickroller

in accordance with the section 5.3.2.

case that PPC document is fed. Replacement cycle of the pad

and the pickroller may be 100,000 sheets or more if the paper

quality is good and cleaning is done well. Before you start the

large quantity reading, check the replacemtne cycle of them

and prepare pads and pickrollers.

4 – 5