Fujitsu M3099GX Руководство по процедурам установки - Страница 7

Просмотреть онлайн или скачать pdf Руководство по процедурам установки для Сканер Fujitsu M3099GX. Fujitsu M3099GX 7 страниц. M3099 series production document scanners
Также для Fujitsu M3099GX: Руководство по процедурам установки (9 страниц), Брошюра и технические характеристики (2 страниц)

Fujitsu SCSI Scanner Installation Procedures

your model please consult the user manual or refer to the Scanner Hardware Interface

Specifications Web page.

Finally connect the power cord to the scanner and a wall outlet then turn on the scanner.

For those models without a power switch plug in the power supply to the back of the

scanner. To establish communication between the Scanner and your PC system turn on

the scanner prior to turning on your system. The scanner power and LED/LCD display

will light up. Next after the scanner completes its startup initialization the LED/LCD will

display either ready or the number one. This indicates that the scanner is ready.

The New Hardware wizard will now pop up. Select search for the driver automatically

and follow the prompts. Since the driver is already installed on the hard disk drive you

do not need to select search the internet. When completed you will see the scanner

installed under Imaging devices in Device Manager.

SPECIAL NOTE: For the SP10C\15C\600C\620C When the New Hardware wizard

comes up, allow it to search your system for the scanner. Next, when you get the no

device driver found message, select finish. There is no INF file at this time, therefore the

scanner will be placed under "other devices" with a "?" in device manager. This is

normal.

Step G: Scanning with ScandAll 21.

1. Launch ScandAll 21 by clicking on the shortcut link on your desktop or manually by

clicking on Start, Programs, Scanner Utility for Microsoft Windows, then

ScandAll 21.

2. After the Untitled Screen has open, click on Scan and choose Select Source.

3. Select the Fujitsu Twain source for your scanner by Highlighting it and clicking

OK. You will only need to do this once unless you are scanning with multiple

sources.

4. Once you are back at the Untitled Screen click on Scan and select To View this

time. The Twain User Interface will popup.

5. Select the scanning parameters that you wish to use – Color mode, resolution,

paper size, etc...

6. Next under Scan Type choose either ADF or Flatbed in the dropdown box.

7. Place your document in the ADF or on the Flatbed face down and click on the Scan

button.

8. After the document is scanned close the Twain User Interface and the image will

appear on the Untitled Screen.

Congratulations! You have successfully completed and tested your scanner installation.

Step H: Installing third party software applications.

After you have successfully installed all the Fujitsu software and hardware, then it is time

to install any additional third party scanning software that you wish to use. Please follow

the software manufacturer's instructions for installation.

*If you do not have any unzipping software installed on your system, you can download a free

evaluation copy at www.winzip.com.

Rev051906A

Windows 95\98\98SE\ME\2000\XP

Page 7 of 7