Fujitsu M4099D Процедуры установки - Страница 2

Просмотреть онлайн или скачать pdf Процедуры установки для Сканер Fujitsu M4099D. Fujitsu M4099D 3 страницы. A3 duplex document scanner
Также для Fujitsu M4099D: Руководство по процедурам установки (7 страниц), Руководство по процедурам установки (9 страниц), Брошюра (2 страниц), Процедуры установки (3 страниц), Процедуры установки (3 страниц), Брошюра и технические характеристики (2 страниц), Брошюра и технические характеристики (2 страниц), Технический паспорт (2 страниц), Инструкции по очистке (2 страниц)

Печатать страницу
Fujitsu M4099D Процедуры установки
Fujitsu SCSI
Scanner Installation Procedures with
The M4097D has the "L" bracket shipping lock.
1. Slide the scanner to its side as shown in figure below.
2. Unscrew the retainer screw and remove the shipping bracket.
3. Place the shipping bracket in the "use position" slot and secure it with the
retainer screw (see figure below)
4. Place scanner back in its normal position
Step D: Connecting the Scanner.
Warning! Before proceeding ensure that the power is off when connecting or
disconnecting the SCSI cable to the scanner or workstation. Failure to follow the
procedure above could result in damage to the SCSI card, scanner, and/or your system.
Termination and the SCSI ID's for both the M4097D and M4099D VRS
scanners are handled automatically. Connect the SCSI cable to the Kofax
controller and to the Wide SCSI (68-pin) port on the scanner. Ensure all
connections are securely fastened.
Connect the power cord to the scanner and a wall outlet. Boot up the host PC
first and then turn on the scanner. Listen to and watch the back of the
Rev010807L
Windows 2000 / XP
VRS (GSA-1)
Page 2 of 3