Fujitsu ScanSnap FI-4110EOX2 Процедуры установки
Просмотреть онлайн или скачать pdf Процедуры установки для Сканер Fujitsu ScanSnap FI-4110EOX2. Fujitsu ScanSnap FI-4110EOX2 2 страницы. Color image scanner
Также для Fujitsu ScanSnap FI-4110EOX2: Технические характеристики (2 страниц), Руководство по началу работы (18 страниц)
![Fujitsu ScanSnap FI-4110EOX2 Процедуры установки](/uploads/products/server2/2440578/2440578.jpg)
This document is intended for installing the following models of Fujitsu ScanSnap scanners.
Fi-4110EOX2
Hardware requirements.
You will need a PC system that meets our recommended specifications. For recommended
PC system specifications please reference the
also need your Operating System Disk.
Step 1:
Option A: Installing the drivers from the Setup CD.
Before connecting the scanner to the computer we recommend installing the scanning
applications first before installing the driver (ScanSnap Manager). After the applications and
drivers are installed Proceed to step 2.
Installing Adobe Acrobat.
1. Insert the Adobe Acrobat Setup CD into your CD Rom.
2. Next click the Install Acrobat button and follow the prompts.
3. Do not reboot at this time!
4. Eject the Acrobat CD and go to the next step.
Installing ScanSnap Manger, Organizer, and Cardminder.
1. Insert the ScanSnap Setup CD into your CD Rom.
2. Next click the Install Products button on the Scanner Setup Menu.
3. Follow the prompts and install the ScanSnap Manager, Organizer, and Cardminder.
4. Once all of the above has been completed then remove the Scansnap Setup CD,
Reboot your system, and go to Step 2.
Option B: Installing the drivers from our Web Page.
If you no longer have your setup CD then please contact our
download the current drivers or to receive a replacement CD.
Step 2: Connecting the Scanner.
Connect the USB cable to the scanner and the USB port of your PC. Ensure that the cable is
securely fastened at both ends.
Finally connect the power cord to the scanner and a wall outlet then turn on the scanner. The
New Hardware wizard will pop up. Select search for the driver automatically and follow the
prompts. Since the driver is already installed on the hard drive you do not select search the
Internet. When completed you will see the Scansnap icon in the system tray (lower right of your
screen).
Step 3: Scanning with Scansnap.
1. Right click on the Scansnap icon in the system tray, then left click on settings.
2. After the Scansnap Manger Screen has opened, click on the Application tab and
using the down arrow select Adobe Acrobat.
Rev 082808A
Fujitsu ScanSnap Installation Procedures
Windows 98SE\ME\2000\XP
Scanner Hardware Reference
Technical Support Department
page. You may
to
Page 1 of 1