Fujitsu ScanZen EK6 Инструкции по замене и очистке расходных материалов - Страница 6
Просмотреть онлайн или скачать pdf Инструкции по замене и очистке расходных материалов для Сканер Fujitsu ScanZen EK6. Fujitsu ScanZen EK6 18 страниц.
Печатать страницу
8. Attach a new pick roller from the bottom.
a. Check the direction of the notch on the pick roller and of the small roller and insert it in
the hole.
b. Close the sheet guide.
Check that the pick roller is installed properly. Otherwise, it may cause feeding errors such as
9. Close the ADF.
10. Reset the roller set counter. Start the Software Operation Panel and reset the counter.
CG00002-297901
©ScanZen
Notch
Be careful not to have your fingers caught when the ADF closes.
ATTENTION:
paper jams.
CAUTION:
Small roller
6