AEG LTR75STEAM Руководство пользователя - Страница 19
Просмотреть онлайн или скачать pdf Руководство пользователя для Стиральная машина AEG LTR75STEAM. AEG LTR75STEAM 40 страниц.
Печатать страницу
If it is necessary to reduce the spin
speed, select a programme with a
lower spin speed as default.
8.7 Vlek./Voorw. - Taches/Prélav.
Press this button repeatedly to activate one of
the two options.
• Vlekken - Taches
Select this option to add an anti-stain
phase to a programme in order to treat
heavily soiled or stained laundry with stain
remover.
Pour the stain remover into compartment
. The stain remover will be added in
the appropriate phase of the washing
programme.
This option can increase the
programme duration and is not
available with a temperature lower
than 40 °C.
• Voorwas - Prélavage
Use this option to add a prewash phase at
30 °C before the washing phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust , mud and other solid particles.
This option can increase the
programme duration.
The corresponding indicator above the
touch button illuminates.
8.8 Spoelen - Rinçage
With this button you can select one of the
following options:
• Extra spoelen - Rinçage Plus option
This option adds a few rinses according to
the selected washing programme.
Use this option for persons allergic to
detergent residues and in areas where the
water is soft.
This option increases slightly the
programme duration.
• Skipping wash phase - Alleen spoelen -
Rinçage option
The appliance performs only the rinsing
phase, the spinning and the draining
phases of the selected programme.
The corresponding indicator above the touch
button illuminates.
8.9 Plus Steam - Vapeur Plus
This option adds a steam phase followed by a
short anti-crease phase at the end of the
washing programme. The steam phase
reduces fabric creasing and facilitates the
fabric ironing.
The indicator
flashes on the display during
steam phase.
The drum performs smooth movements for
about 30 minutes. The duration of the steam
phase changes accordingly to the selection.
When Plus Steam - Vapeur Plus
set the programme ends up with an
anticrease phase during which the drum is
occasionally rotated to prevent wrinkling. The
display shows
the indicator
and the indicator
Pauze - Départ/Pause
At the end of the anticrease phase the drum
definitely stops, the indicator goes off, the
door unlocks. User at any moment can
terminate the anticrease phase by:
• pressing the Aan/Uit - Marche/Arrêt
button for a few seconds to activate or
deactivate the appliance;
• turning the selector knob to another
position.
A small laundry load helps to reach better
results.
8.10 Startuitstel - Départ Différé
With this option you can delay the start of a
programme in a more convenient time.
option is
is steady on
starts flashing. Start/
button is lit as well.
ENGLISH
19