Fujitsu Eternus DX200F Руководство по конфигурации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Хранение Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 16 страниц. Hybrid storage systems, all-flash arrays, power synchronized unit
Также для Fujitsu Eternus DX200F: Руководство по эксплуатации (48 страниц), Руководство по настройке (10 страниц), Руководство по конфигурации (28 страниц), Руководство по конфигурации (13 страниц), Руководство по конфигурации (38 страниц), Меры предосторожности (12 страниц)

Печатать страницу

Fujitsu Eternus DX200F Руководство по конфигурации

Chapter 2

Setting Up the ETERNUS DX/AF

2.1

Common Settings

2.1.3

Setting the Host Responses

The host response parameters for the ETERNUS DX/AF must be set to match the way the server processes the

responses to requests from the ETERNUS DX/AF. Setting of the host response must be done before connecting

the ETERNUS DX/AF to the server.

Set the parameters that are described below for each OS.

Retain the default values for all of the parameters that are not described below.

When setting the access path using the ETERNUS SF Storage Cruiser, the host responses for FC host will be

set to default values. Set the host responses after setting the access path using the ETERNUS SF Storage

Cruiser.

Table 2.5 Host response settings

Solaris (*1)

Windows

Linux

VMware ESX

Citrix XenServer

Oracle VM Server for x86

HP-UX

AIX

IBM SVC

*1: An Oracle-brand Fibre Channel card driver may be used for Fujitsu Fibre Channel cards.

To confirm which driver should be used, check the "Notes" and "Fibre Channel Cards that Require an Ora-

cle-brand Driver" sections in "Configuration Guide -Server Connection- (Fibre Channel) for Oracle So-

laris".

Conditions

When using PRIMECLUSTER (regardless of the

multipath software type)

When using the OS standard Multipath Driver

(MPxIO)

Other cases

–

When using Veritas InfoScale

Other cases

–

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

Host response selection

Default

Solaris MPxIO

Default

HP-UX

AIX VxVM

AIX

SVC

P3AM-7962-15ENZ0