Fujitsu ETERNUS DX400 S2 Series Руководство по конфигурации - Страница 15
Просмотреть онлайн или скачать pdf Руководство по конфигурации для Хранение Fujitsu ETERNUS DX400 S2 Series. Fujitsu ETERNUS DX400 S2 Series 38 страниц. Server connection. (fibre channel) for aix
Печатать страницу
Chapter 3
Notes
3.10
Virtual I/O Server (VIOS) Notes
3.10
Virtual I/O Server (VIOS) Notes
Perform the settings described in this manual only for a VIOS.
•
When performing VIOS settings or installing software, the root privilege for the VIOS environment is re-
quired.
To use a VIOS, ETERNUS Multipath Driver 2 (AIX) or FJSVmpio is required. Install ETERNUS Multipath Driver 2
•
(AIX) or FJSVmpio in the VIOS.
Configuring LVM on the VIOS is not supported.
•
3.11
Oracle RAC Notes
Set the CSS miscount parameter to a value of 60 or higher.
•
Set "fc_err_recov", an "fscsi" attribute, to "fast_fail".
•
3.12
Path Addition Notes
Added paths may not be automatically recognized if the OS is not rebooted after adding the paths. In that
case, execute the following command.
#cfgmgr
In addition, if Veritas Volume Manager (VxVM) is used, execute the following command.
#vxdctl enable
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
15
Copyright 2018 FUJITSU LIMITED
P3AM-3782-23ENZ0