Fujitsu Eternus DX440 S2 Руководство пользователя - Страница 27

Просмотреть онлайн или скачать pdf Руководство пользователя для Хранение Fujitsu Eternus DX440 S2. Fujitsu Eternus DX440 S2 42 страницы. Disk storage system settings
Также для Fujitsu Eternus DX440 S2: Руководство пользователя (35 страниц), Установка Настройка (20 страниц), Руководство по конфигурации (28 страниц), Руководство по конфигурации (15 страниц)

Chapter 6

Setting Up the VMware ESX Server

6.1

For VMware vSphere

6.1.6

Checking the LUNs

The following procedure describes how to check LUN recognition using the vSphere Client.

system LUNs are recognized.

The procedure is as follows:

Use the vSphere Client to log in to VMware ESX as "root".

Select the [Configuration] tab.

Select [Storage Adapters] from the [Hardware] list.

Select [Rescan...].

After selecting [Rescan...], the VMware ESX should attempt to recognize the ETERNUS DX Disk stor-

age systems' LUNs again.

If the iSCSI Software Adapter (vmhba34 in this example) is selected from the [Storage Adapters] area,

the recognized devices will be shown in the [Details] area, as follows.

Check the [Path Selection] for all the LUNs in the ETERNUS DX Disk storage system.

When the VMware ESX server recognizes the LUNs, the active path for each LUN is automatically set. In

this case, [Path Selection] is set to [Most Recently Used (VMware)].

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

ESX

P3AM-3412-13ENZ0