Brother Inkjet MFC-J4710DW Руководство по быстрой настройке - Страница 34

Печатать страницу

Brother Inkjet MFC-J4710DW Руководство по быстрой настройке

For Wireless Network Users

Manual setup from the

control panel using the

Setup Wizard

(Windows

and mobile devices)

You must have the wireless settings you

wrote down for your network in step 19-b on

page 30 before you proceed.

Press

Press Setup Wizard.

When Switch Network interface to

wireless? is displayed, press Yes to accept.

This will start the wireless setup wizard.

To cancel, press No.

The machine will search for available SSIDs. It

will take several seconds to display a list of

available SSIDs.

If a list of SSIDs is displayed, swipe up or down,

or press a or b to choose the SSID you wrote

down in step 19-b on page 30. Select the

SSID you want to connect with. Press OK.

If the wireless access point/router of the

selected SSID supports WPS and the machine

asks to use WPS, go to c.

If the machine asks you to enter a Network

Key, go to d.

Otherwise, go to e.

NOTE

• If a list of SSIDs is not displayed, make sure

your access point is on. Move your machine

closer to the access point and try starting

from a again.

• If your access point is set to not broadcast the

SSID, you will have to manually add the SSID

name. For details, see the Network User's

Guide.

Press Yes to connect your machine using

WPS. (If you choose No to continue manual

configuration, go to d to enter a Network Key.)

When the Touchscreen indicates you should

start WPS, press the WPS button on your

wireless access point/router, and then press

Next to proceed.

Go to e.

, Macintosh

Enter the Network Key you wrote down in

step 19-b on page 30 using the Touchscreen.

Press

to cycle between lower case and

upper case. Press

letters, numbers and special characters. (The

characters available may differ depending on

your country.) To move the cursor to the left or

right, press d or c.

(For more information, see Entering Text for

Wireless Settings on page 45.)

Press OK when you have entered all the

characters, then press Yes to apply your

settings.

Your machine will now try to connect to your

wireless network. It may take a few minutes.

A connection result message appears for

60 seconds on the Touchscreen and a WLAN

report will automatically be printed.

If the connection failed, check the error code on

the printed report and refer to Troubleshooting

on page 36.

Wireless setup is now complete. The

Wi-Fi button at the upper right of the

Touchscreen changes to a four-level

indicator that displays the wireless signal

strength of your access point/router.

The Wi-Fi LED

lights up, indicating that the machine's

Network I/F is set to WLAN.

NOTE

For Mobile Device users, please go to the User's

Guide for the application you are using (Ex.

AirPrint, Brother iPrint&Scan or other

applications) for additional details on how to use

your machine with the application. To download

the User's Guide for the application you are using,

please go to the manuals download selection on

your model's home page of the Brother Solutions

Center at http://solutions.brother.com/.

To install MFL-Pro Suite, continue to

step 21.

For Windows

users:

Now go to

Page 38

For Macintosh users:

Now go to

Page 41

to cycle between

on the control panel