Brother MFC 620CN - Color Inkjet - All-in-One Руководство по быстрой настройке - Страница 10
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Сервер печати Brother MFC 620CN - Color Inkjet - All-in-One. Brother MFC 620CN - Color Inkjet - All-in-One 37 страниц. Control panel overview
Также для Brother MFC 620CN - Color Inkjet - All-in-One: Руководство по быстрой настройке (37 страниц), Справочный список деталей (30 страниц), Обзор (3 страниц)
Step 1
Print Quality Check
6
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
Press Start
2
Make sure the paper is loaded in the paper
tray.
Press Color Start.
The machine starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
3
Check the quality of the four color blocks
formed by the short lines printed on the
sheet.
(BLACK/ CYAN/ YELLOW/ MAGENTA)
1. Check the quality of the four-color blocks formed by the short lines.
2. If all the short lines are clear and visible, the quality is acceptable. the quality is acceptable.
Select (Yes). If you can see missing short lines, select (No) to begin the color cleaning process
and follow the prompts on the LCD.
Avoid touching the printed surface
of the paper immediately after
printing, the surface may not be
completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
1.Yes 2.No
8
Setting Up the Machine
Print Quality Check
5
If all lines are clear and visible, press 1 on
the dial pad to finish the quality check.
---OR---
If you can see missing short lines, press 2
on the dial pad and go to
OK
6
The LCD asks you if the print quality is OK
for black and color. Press 1 or 2 on the dial
pad.
Black OK?
1.Yes 2.No
After making your selection 1 (Yes) or 2 (No)
for both black and color, the LCD shows:
Start Cleaning?
1.Yes 2.No
Press 1 (Yes), the machine will then start
cleaning the colors.
After cleaning is finished, press Color Start.
The machine starts printing the PRINT
QUALITY CHECK SHEET again and goes
3
back to step
.
6
.
Poor