Brother MFC 640CW - Color Inkjet - All-in-One Руководство по быстрой настройке - Страница 32

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Сервер печати Brother MFC 640CW - Color Inkjet - All-in-One. Brother MFC 640CW - Color Inkjet - All-in-One 45 страниц. Windows network connection
Также для Brother MFC 640CW - Color Inkjet - All-in-One: Руководство по быстрой настройке (45 страниц), Инструкции по ремонту (5 страниц), Руководство по эксплуатации (11 страниц)

STEP2

Installing the Driver & Software

Carefully guide the network cable to the trench

as shown below, following the trench around

and toward the back of the machine.

Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

In case of using both USB and LAN cables, guide

both cables into the trench with one on top of the

other.

Lift the scanner cover to release the lock.

Gently push the scanner cover support down

and close the scanner cover.

Turn on the machine by plugging in the power

cord.

Improper Setup

If you have setup wireless networking on your

machine before and you setup the wired

network, you should check that the machine's

Network I/F setting is set to Wired LAN. The

wireless network interface will be inactive with

this setting.

Press Menu/Set, 5, 6, and then press a or b to

choose Wired LAN. Press Menu/Set and then

press 1 1.Yes to accept the change.

The machine will restart automatically.

Choose Network and then click OK.

If you want to use the machine's Scan key to

scan over the network you must check the

functions at the machine box. You must also

enter a name for your Macintosh

Name. The name you enter will appear on the

machine's LCD when you press the Scan key

and choose a scan option. You can enter any

name up to 15 characters long.

(For more information on network scanning,

see Chapter 11 of the Software User's Guide

on the CD-ROM.)

Click Browse.

Choose your model name, and then click OK.

Click Go, then Applications.

Macintosh

in Display