Brother MFC 640CW - Color Inkjet - All-in-One Инструкции по ремонту - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по ремонту для Сервер печати Brother MFC 640CW - Color Inkjet - All-in-One. Brother MFC 640CW - Color Inkjet - All-in-One 5 страниц. Windows network connection
Также для Brother MFC 640CW - Color Inkjet - All-in-One: Руководство по быстрой настройке (45 страниц), Руководство по быстрой настройке (45 страниц), Руководство по эксплуатации (11 страниц)

Печатать страницу

Brother MFC 640CW - Color Inkjet - All-in-One Инструкции по ремонту

MFC640CW Windows Network Connection Repair Instructions

e. Highlight your device and click OK. If you are not able to locate your Brother

machine in the list, this issue is likely caused by other connectivity problems or

machine errors. Continue to PART 8 to reinstall the drivers.

Uncheck the box for RESOLVE IP ADDRESS BY NODE NAME. The IP Address of your

Brother machine should now be listed, verify that it is correct and click OK.

g. Click APPLY.

h. Click on the GENERAL tab.

Click PRINT TEST PAGE.

A test page should now print correctly. If the test page does not print, close the

PRINTER PROPERTIES window and right click on the printer, then left click on

CANCEL ALL DOCUMENTS.

k. Right click on the Brother driver and left click on PROPERTIES. The Brother printer

driver properties screen will now appear.

Click the DETAILS tab.

m. Click ADD PORT.

n. Choose OTHER then highlight BROTHER LPR PORT. Click OK. If the Brother LPR port

is not listed continue to PART 8 to reinstall the drivers.

o. Enter the port name, which by default is BLP1. The name must begin with BLP and

cannot have the same name as an already existing port. Click OK. If you receive an

error that the Port Name already exists, close the error and choose a different port

name.

p. In the Port Settings dialog box, enter the IP address of the machine from the

Network Configuration sheet you printed in PART 7-1. Click OK. You will return to

the Details Tab and the new port will be listed under Print to the Following Port.

q. Click APPLY.

r. Click on the GENERAL tab.

s. Click PRINT TEST PAGE. A test page should now print correctly. If the test page

does not print, close the PRINTER PROPERTIES window and right click on the

printer, then left click on CANCEL ALL DOCUMENTS. Continue to PART 8.

For WINDOWS 2000/XP: Click the PORTS tab.

a. You will see a list of the available communication ports on your PC (Ex: LPT1:,

LPT2:, COM1:, ETC) Scroll down the list and you will see the current network port

of your printer. Click on CONFIGURE PORT#

b. When the CONFIGURE PORT screen appears compare the IP address or Node Name

with the IP address or Node Name listed on the network configuration page printed

in PART 7- step 1. If you receive an error and cannot configure the port, close the

error and continue to step 4-j.

c. If the IP address or Node Name is different continue to the next step. If the IP

address or node name is not different this issue is likely caused by other

connectivity problems or machine errors. Continue to PART 8 to reinstall the

drivers.

d. In the PRINTER NAME OR IP ADDRESS area enter the IP address or Node Name

listed on the network configuration page.

e. Click OK and this will return you back to the PRINTER PROPERTIES page.

Click on the GENERAL tab.

g. Click PRINT TEST PAGE.

h. A test page should now print correctly. If the test page does not print, click OK and

close the PRINTER PROPERTIES window. Right click on the printer, then left click on

CANCEL ALL DOCUMENTS.

Right click on the Brother driver and left click on PROPERTIES. The Brother printer

driver properties screen will now appear.

Click the PORTS Tab.

k. Click ADD PORT.