Fujitsu ETERNUS2000 model 100 Руководство по подключению - Страница 27

Просмотреть онлайн или скачать pdf Руководство по подключению для Хранение Fujitsu ETERNUS2000 model 100. Fujitsu ETERNUS2000 model 100 31 страница. Disk storage system
Также для Fujitsu ETERNUS2000 model 100: Руководство (28 страниц), Руководство по подключению сервера (25 страниц), Руководство по подключению сервера (32 страниц), Руководство по подключению (19 страниц)

Печатать страницу
Fujitsu ETERNUS2000 model 100 Руководство по подключению
Chapter 10 Setting Up and Checking the device-mapper multipath
>
10.2 For SLES
10.2.3

Rebooting the Linux Server

Reboot the Linux server.
Example:
# shutdown -r now
10.2.4

Recognizing the Post device-mapper multipath LUNs

Check the device file created by the device-mapper multipath.
Also check that the device file is linked to the "/dev/dm-X" file.
Example:
#cd /dev/disk/by-name/
#ls -l
lrwxrwxrwx 1 root root 10 Aug 25 13:40 mpatha -> ../../dm-0
lrwxrwxrwx 1 root root 10 Aug 25 13:40 mpathb -> ../../dm-1
lrwxrwxrwx 1 root root 10 Aug 25 13:39 mpathc -> ../../dm-2
lrwxrwxrwx 1 root root 10 Aug 25 13:39 mpathd -> ../../dm-3
lrwxrwxrwx 1 root root 10 Aug 25 13:40 mpathe -> ../../dm-4
lrwxrwxrwx 1 root root 10 Aug 25 13:39 mpathf -> ../../dm-5
lrwxrwxrwx 1 root root 10 Aug 25 13:39 mpathg -> ../../dm-6
10.2.5

Checking the device-mapper multipath Status and Created Devices

Check the path status using the "multipath -ll" command.
•
When both paths are in normal status (This example is for the ETERNUS2000)
The multipath consists of the block device
names "sde" and "sdc". "mpathc" is created.
# multipath -ll
mpathc (3600000e00d00000000000f7e00010000) dm-2 FUJITSU,E2000
size=10G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=150 status=active
| '- 4:0:0:1 sde 8:64 active ready running
'-+- policy='round-robin 0' prio=10 status=enabled
:
:
P3AM-4212-02ENZ0
ETERNUS2000 Disk storage systems Server Connection Guide (SAS) for Linux
:
'- 3:0:0:1 sdc 8:32 active ready running
Two block device names are
displayed for a two-path configuration.
"E2000" is displayed since
the ETERNUS2000 is connected.
When the path status is normal,
"active ready" is displayed.
27
Copyright 2010 FUJITSU LIMITED