Fujitsu ETERNUS8000 2200 Руководство - Страница 18

Просмотреть онлайн или скачать pdf Руководство для Хранение Fujitsu ETERNUS8000 2200. Fujitsu ETERNUS8000 2200 21 страница. Disk storage systems (fibre channel) for oracle solaris
Также для Fujitsu ETERNUS8000 2200: Руководство (28 страниц), Руководство по подключению сервера (25 страниц), Руководство по подключению сервера (32 страниц), Руководство по подключению (19 страниц)

Печатать страницу

Chapter 3 Setting Up MPxIO

3.3 Solaris 8 OS

#pragma ident

name="scsi_vhci" class="root";

# mpxio global enable/disable switch: setting mpxio-disable="no" will activate

# I/O multipathing; setting mpxio-disable="yes" disables this feature (do

# not remove this property).

mpxio-disable="no";

# Load balancing global configuration: setting load-balance="none" will cause

# all I/O to a given device (which supports multipath I/O) to occur via one

# path.

# to be used in turn.

load-balance="round-robin";

# Force load driver to support hotplug activity (do not remove this property).

ddi-forceattach=1;

# Automatic failback configuration

# possible values are auto-failback="enable" or auto-failback="disable"

# This functionality requires patch 113039-02 (or higher).

auto-failback="enable";

# For enabling MPxIO support for 3rd party symmetric device need an

# entry similar to following in this file. Just replace the "SUN

# part with the Vendor ID/Product ID for the device, exactly as reported by

# Inquiry cmd.

# This functionality requires patch 113039-02 (or higher).

# device-type-scsi-options-list =

# "SUN

# symmetric-option = 0x1000000;

device-type-scsi-options-list =

"FUJITSU E8000", "symmetric-option";

symmetric-option = 0x1000000;

3.3.4

Reconfiguring and Restarting the Server

Reconfigure and restart the server to effect the new settings.

The ETERNUS Disk storage system can be reconfigured by creating the "/reconfigure" file and

rebooting the server.

# touch /reconfigure

# /usr/sbin/shutdown -y -g0 -i6

P3AM-2722-04ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

"@(#)scsi_vhci.conf

Check that mpxio-disable is set to "no".

Setting load-balance="round-robin" will cause each path to the device

Check that auto-failback is enabled.

SENA", "symmetric-option";

1.3

01/08/22 SMI"

Check that the symmetric-option

is enabled for the ETERNUS8000, in this case.

SENA"

End of procedure