Fujitsu ETERNUS8000 800 Руководство по подключению - Страница 9

Просмотреть онлайн или скачать pdf Руководство по подключению для Хранение Fujitsu ETERNUS8000 800. Fujitsu ETERNUS8000 800 19 страниц. Disk storage systems (fibre channel) for oracle solaris
Также для Fujitsu ETERNUS8000 800: Руководство (28 страниц), Руководство (21 страниц), Руководство по подключению сервера (25 страниц), Руководство по подключению сервера (32 страниц)

Chapter 3

The server setup will vary according to how the ETERNUS Disk storage systems and server are

to be connected. Only Fabric connections are supported.

The Fibre Channel card Instance name, target WWN, and target ID information are necessary.

Check each item and enter them in the list. Edit the configuration file according to those informa-

tion and make settings.

Refer to the following to set.

• "3.1 Creating a WWN Instance Management Table for the Server" (page 9)

• "3.2 Setting Up Brocade Fibre Channel Cards" (page 12)

• "3.3 Setting the Configuration File (/etc/system)" (page 14)

3.1

Creating a WWN Instance Management Table for the

Server

Determine the following information for each Fibre Channel card installed in the server and enter

it into a copy of the "WWN instance management table for the server" (provided in

Management Table Template" (page

•

Physical slot name

•

WWN

•

Number of the target controller connected to the Fibre Channel card

•

Instance name

•

Physical path name

WWN Instance Management Table for the Server

Physical slot name

P3AM-4562-01ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

Setting Up the Server

WWN

Procedure

Check the instance names.

"bfa + instance number" is the format used to represent Fibre Channel card instance

names.

17)).

Controller

Instance

Physical path name

name

"Appendix A