Brother MFC-8910DW Руководство - Страница 28

Просмотреть онлайн или скачать pdf Руководство для Сервер печати Brother MFC-8910DW. Brother MFC-8910DW 30 страниц. Quick setup guide - english
Также для Brother MFC-8910DW: Руководство (36 страниц), Руководство по работе с сетью (29 страниц), Руководство (27 страниц), Руководство по быстрой настройке (45 страниц), Руководство пользователя (23 страниц), Руководство по быстрой настройке (45 страниц), Руководство по безопасности продукции (23 страниц)

Glossary

If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi

Direct network. The G/O assigns a SSID name, password and IP address for the Wi-Fi Direct network. The

default setting is Off.

Device Name

You can check the device name of the machine in the Wi-Fi Direct network environment. The device name

will be shown as HL-xxxx** or MFC-xxxx** (where xxxx is your model name and ** is the character string

assigned by your Brother machine).

SSID

This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the

SSID name.

IP Address

This field displays the current IP address of the machine assigned by the G/O.

Status

This field displays the current Wi-Fi Direct network status. When your machine is a G/O, the machine shows

G/O Active(**) (where ** shows the number of devices). When your machine is a client, the machine

shows Client Active. If you see Off, your machine's Wi-Fi Direct interface is disabled.

Signal

This field displays the current Wi-Fi Direct network signal strength.

Channel (For HL-5470DW(T) and HL-6180DW(T))

This field displays the current Wi-Fi Direct network channel.

Speed (For HL-5470DW(T) and HL-6180DW(T))

This field displays the current Wi-Fi Direct network speed.