Fujitsu LTO-5 Руководство пользователя - Страница 30
Просмотреть онлайн или скачать pdf Руководство пользователя для Хранение Fujitsu LTO-5. Fujitsu LTO-5 34 страницы. Fujitsu lto-5 half-height sas tape drive
Печатать страницу
Understanding LED sequences
LED Sequence
The tape is ejected
immediately and
Tape FLASHES, or
Drive FLASHES on
unloading tape.
Drive FLASHES.
Drive, Tape and
Ready FLASH.
Drive and Ready
ON with Tape and
Clean OFF.
Alternates
repeatedly.
Table 3: Clean, Tape, Drive and Ready LED sequences
30
Cause
The tape cartridge
memory (CM) may
be faulty.
The drive
mechanism has
detected an error.
There is a firmware
download problem.
The drive has a
firmware error.
Action required
Write protect the cartridge by
sliding the switch on the tape
cartridge, see
"Write protecting
cartridges" on page
can be loaded and the data read.
Once the data is recovered, the
cartridge must be discarded.
Load a new cartridge. If the error
persists, power cycle the server.
If the Drive LED remains on, call
for service.
Insert a cartridge to clear the LED
sequence. If the condition persists,
call for service.
Power cycle the server.
Upgrade the firmware. If the
condition persists, call for service.
LTO-5 Half-Height SAS Tape Drives
19. The tape