AEG ProSense 6000 Series Руководство пользователя - Страница 14
Просмотреть онлайн или скачать pdf Руководство пользователя для Стиральная машина AEG ProSense 6000 Series. AEG ProSense 6000 Series 40 страниц.
Печатать страницу8.2 Introduction
The options/functions are not selectable
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set the
incompatible options/functions together.
Make sure the screen and touch buttons
are always clean and dry.
8.3 Temperatuur
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Set this option to change the default
temperature.
The indicator
= cold water of the set
temperature comes on (the appliance does
not heat the water).
8.4 Centrifugeren
When you set a programme, the appliance
automatically sets the maximum spin speed
allowed.
Touch repeatedly this button to:
Activate the Rinse hold
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The door stays locked and the drum turns
regularly to reduce creasing.
• You must drain the water to unlock the
door.
• If you touch the Start/Pauze button, the
appliance performs the spinning phase
and drains the water.
The appliance empties the water out
automatically after 18 hours
approximately.
14
ENGLISH
option
Activate the No spin
• Set this option to deactivate all spin
phases. Only the drain phase is available.
• The related indicator comes on.
• Set this option for very delicate fabrics.
• The rinses phase uses more water for
some washing programmes.
The spin speed can be reduce.
8.5 Extra
Press this button repeatedly to activate one of
the available options.
• Vlekken
Select this option to add an anti-stain
phase to a programme in order to treat
heavily soiled or stained laundry with stain
remover.
Pour the stain remover into
compartment . The stain remover will be
added in the appropriate phase of the
washing programme.
This option can increase the
programme duration.
This option is not available with a
temperature lower than 40 °C.
• Voorwas
Use this option to add a prewash phase at
30 °C before the washing phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust , mud and other solid particles.
This option can increase the
programme duration.
• Only rinse
The appliance performs only the rinsing
phase, the spinning and the draining
phases of the selected programme.
The relevant indicator comes on.
option