Brother MFC-9320CW Руководство по подключению - Страница 2

Просмотреть онлайн или скачать pdf Руководство по подключению для Сервер печати Brother MFC-9320CW. Brother MFC-9320CW 6 страниц. Vista network connection repair instructions
Также для Brother MFC-9320CW: Технические характеристики (6 страниц), Руководство по быстрой настройке (47 страниц), Руководство по быстрой настройке (49 страниц)

Печатать страницу

Brother MFC-9320CW Руководство по подключению

MFC9320CW Vista Network Connection Repair Instructions

If you receive replies, verify that the replies are from the correct IP address. If you

receive valid replies, then there is communication between the computer and the Brother

machine. Continue to PART 5 to continue troubleshooting.

d. If you don't receive any replies or they are not from the correct IP address, then this

indicates that there is a communication problem between the Brother machine and the

Computer. Check the following:

If the computer is wireless, confirm that it is connected to the same network that the

Brother machine is connected to. If it is connected to a neighboring wireless network,

then you will need to troubleshoot your computer's network connection.

If the computer's connection is verified but you still have no communication, ensure

there are no firewalls or other security applications running. Repeat PART 3 after

making any adjustments to the configuration. If you still can't ping the Brother

machine, or no changes were made continue to PART 4 to attempt to reestablish

communication unless you have already completed Part 4 once. If you have already

completed PART 4, and are still unable to communicate with the Brother machine,

then the issue is likely with the network connection. Contact you network admin or

router manufacturer for further assistance with this computer's network connection. If

you can print from other computers on the network but cannot ping from this

computer on the network, then the issue is specific to the network communication.

Contact you network admin or router manufacturer for further assistance with this

computer's network connection.

PART 4: ESTABLISH A WIRELESS CONNECTION:

NOTE: All network settings will be reset with this operation. If you can print or scan from

other computers on the network, but not from this specific computer, do not reset the

network card. Doing so will affect the other computers on the network. In this case there

is an issue specific to this computer's network communication. Some common causes are

software firewalls, security programs, and other software applications that may be blocking

communication. Contact your computer manufacturer or network admin for support

troubleshooting this particular computer.

Click here

for instructions on how to join the Brother machine to an Infrastructure Network.

(Connected to a computer through an Access Point/Router - Recommended).

Click here

for instructions on how to setup the Brother machine on an Ad-Hoc network.

(Connected directly to a wireless capable computer without an Access Point/Router).

3. Once the machine is connected, refer back to PART 3 to verify that the computer and Brother

machine can communicate with each other.

PART 5: RUN THE NETWORK REPAIR UTILITY

Click here

to download and run the Network Repair Utility

2. Make a temporary folder on your HDD [hard disk drive] as the location to save the

downloaded self-extracting file, e.g. C:\bro

3. Download the file to the temporary folder.

4. Once the download is complete, open the folder and double click on the downloaded file to

extract it. "nettool" folder is created.

5. Open the "nettool" folder and double click "BrotherNetTool.exe".