Fujitsu FTP-633MCL400 Технический паспорт - Страница 11
Просмотреть онлайн или скачать pdf Технический паспорт для Принтер Fujitsu FTP-633MCL400. Fujitsu FTP-633MCL400 12 страниц. Battery drive, micro line thermal printer 3" type mechanism and interface board
Печатать страницу
PRINTING COMMANDS (CENTRONICS STANDARD INTERFACE)
Name
Carriage return
Double width print set
Power-down mode set
Double width print reset
ESC sequence entry
Line space set
Paper feed set in normal direction
Bit image print set
International character set
Download character register
Printing quality set
Printing density set
Paper feed set in reverse direction
Character grade set
Special character print set
Start position set for bit-image printing
Detecting function set
Mark detection
Line feed length set after mark detection ESC w+n
Automatic paper loading length set
Automatic printing speed set
Printer initialization
Notes:
*: "SP" means the space code (20H).
Bus interface uses different commands.
FTP-633MCL400/FTP-623DCL002
Command
LF, CR
SO
DC2, DC3
DC4
ESC
ESC A + n
ESC B + n
ESC K +n
+n
+n
1
2
3
ESC R+n
ESC &+n
+n
+~
1
2
ESC Q+n+SP*+~
ESC Q+n+!+A
ESC j+n
ESC x+n
ESC ¥+n
ESC 1+n
ESC 9+n
ESC FF
ESC EM+n
ESC s+n
ESC @
Contents
Prints buffer data and return the line.
Sets the double width character.
Reduces the power consumption during standing
by.
Resets the double with character.
Indicates the start of an escape sequence formed
by this code plus subsequent commands.
Sets the line space length in 2
lines).
Sets the paper feed in normal direction.
(Feeding range: 2
(0 to 255 dot lines))
Sets the bit image printing in single or double
density mode.
Selects the international characters.
Registers the download characters of 12
8 dots.
Sets the printing quality conforming to used paper.
Sets the printing density mode.
(Single density standard, reduced or double
density)
Sets the paper feed in reverse direction.
(Feeding range: 2
(1 to 255 dot lines))
Sets the character grade in standard or high
grade.
Prints the special character.
Sets the print start position of bit-image printing in
left end.
Sets the detecting function.
Feeds the paper to the marking position.
Sets the line feed length after mark detection.
Sets paper feeding length for automatic paper
loading.
Sets the function mode in the automatic printing
speed set.
Initializes the printer MPU.
(0 to 255 dot
6 or 16
11