Fujitsu ST6012 - Stylistic Tablet PC Руководство по биосфере - Страница 21
Просмотреть онлайн или скачать pdf Руководство по биосфере для Планшет Fujitsu ST6012 - Stylistic Tablet PC. Fujitsu ST6012 - Stylistic Tablet PC 27 страниц. Stylistic st6000 series
Также для Fujitsu ST6012 - Stylistic Tablet PC: Технические характеристики (2 страниц), Информационный лист (6 страниц)
Печатать страницу
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Supervisor
–—
Password is:
User Password is:
–—
Set Supervisor
–—
Password
Set User Password
–—
Minimum User Pass-
–—
word Length:
Password on Boot:
Disabled
First Boot
Every Boot
On Automatic
Disabled
Wake up:
Enabled
Boot from
All
Removable Media:
Supervisor only
Flash Write:
Disabled
Enabled
Smartcard PC Lock:
Disabled
Enabled
Hard Disk Security:
–—
Owner Information:
–—
TPM (Security Chip)
___
Setting
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
Default
Description
Clear
A display-only field. Set is displayed when the system supervisor password is
set and Clear when it is not.
Clear
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
[Enter]
Sets, changes or cancels the Supervisor Password. The Supervisor Password
may be up to seven characters long and must include only letters or numbers
(no symbols). Passwords are NOT case-sensitive. To cancel a password press
the Enter key instead of entering characters in the Enter New Password field
and in the Re-enter New Password field. When a Supervisor Password is set it
must be used to access the BIOS setup utility.
NOTES: If your system has the Pre-Boot Authentication (PBA) feature, you
cannot log in as a supervisor using your fingerprint. Note, also, that on finger-
print-enabled PBA systems, when the supervisor password is cleared, the BIOS
will display a message asking you to acknowledge that the BIOS fingerprint
data will be cleared as well.
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets, changes
or cancels the User Password. A User Password may be up to seven characters
long and must include only letters or numbers (no symbols). Passwords are
NOT case-sensitive. To cancel a password press [Enter] key instead of entering
characters in the Enter New Password field and in the Re-enter New Password
field. When a User Password is set it must be used to access the BIOS setup
utility.
[0]
Supervisor can set password length (0 to 8) for user password. User cannot set
a password shorter than the minimum length.
[Disabled]
When set to First Boot, a password (User or Supervisor) is required just once
after the Power On Self Test (POST) before the operating system will be read
from a disk. When set to Every Boot, a password (User or Supervisor) is
required every time after the Power On Self Test (POST) before the operating
system will be read from a disk. When set to Disabled no password is required.
NOTE: If your system has the Pre-Boot Authentication (PBA) feature, this field
must be set to [Every Boot] to ensure that the PBA window appears.
[Disabled]
When disabled, password entry is not required when the system wakes up
automatically. When enabled, password entry is required upon wake up.
[All]
Supervisor only allows access to boot the computer to removable media after
the Supervisor Password is entered.
[Enabled]
When disabled, the BIOS Flash memory will be write protected.
[Disabled]
When enabled, the system is locked using Smartcard security. A personal iden-
tification number (PIN) is required to enter the BIOS Setup Utility and before
OS boot.
–—
Configures hard disk security features
–—
Sets Owner information.
___
Opens the Trusted Platform Module (TPM) Security Chip Setting submenu to
configure the Security Chip.
S e c u r i t y M e n u
21