Fujitsu D2530 Техническое руководство - Страница 17
Просмотреть онлайн или скачать pdf Техническое руководство для Материнская плата Fujitsu D2530. Fujitsu D2530 35 страниц. For econel 200 s2
Печатать страницу
Features
The PCI interrupts INTA#, INTB#, INTC# and INTD# are available for each PCI
slot (except the PCI-Express slots).
The same interrupt can be assigned simultaneously to several PCI boards. You
should avoid this condition due to reduced performance.
If you use a setting other than Auto, the Plug&Play functionality of the system
BIOS for the corresponding PCI boards is deactivated.
The PCI interrupts are assigned automatically in accordance with
Auto
the Plug&Play guidelines.
No ISA interrupt is assigned to the PCI interrupt.
Disabled
3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15
The selected ISA interrupt is assigned to the PCI interrupt. You
may not select an ISA interrupt that is used by a component on
the system board (e.g. controller) or an ISA board.
Device
Bus
Slot 1
PCI-X
Slot 2
PCI-X
Slot 3
PCI-X
Slot 4
PCI
Slot 5
PCI-Express
Slot 6
PCI-Express
VGA
PCI
LAN
USB UHCI
Controller #0
USB UHCI
Controller #1
USB UHCI
Controller #2
USB UHCI
Controller #3
USB 2.0 EHCI
D2530 (Econel 200 S2)
IDsel
INTA
19
PXIRQ8
18
PXIRQ4
17
PXIRQ0
17
PIRQA
18
PIRQB
PIRQE
PIRQA
PIRQD
PIRQC
PIRQA
PIRQH
Technical Manual
INTB
INTC
PXIRQ9
PXIRQ10
PXIRQ5
PXIRQ6
PXIRQ1
PXIRQ2
PIRQB
PIRQC
PCI bus
INTD
PXIRQ11
PXIRQ7
PXIRQ3
PIRQD
17