Fujitsu D2530 Техническое руководство - Страница 23
Просмотреть онлайн или скачать pdf Техническое руководство для Материнская плата Fujitsu D2530. Fujitsu D2530 35 страниц. For econel 200 s2
Печатать страницу
Features
LAN connector
On this system board you will find a LAN controller integrated in the Intel
I/O controller Hub (ICH). This controller is supported by an external chip (Intel
Single 1 GB PHY 82564EB), which is connected to the I/O controller Hub via an
original Intel interface (Kumeran Interface). The LAN controller supports the
transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s and supports WOL function
through Magic Packet™.
It is also possible to boot a device without its own boot hard disk via LAN. Here
Intel PXE is supported.
The LAN controller connector is equipped with two LEDs (light emitting diode)
indicating the transfer rate and the activity.
Figure 6: LAN connector
1
LAN link/activity
2
LAN transfer rate
D2530 (Econel 200 S2)
1
green
on
off
flashing
green + orange off
green
on
orange
on
Technical Manual
Connectors and jumpers
2
LAN connection
no LAN connection
LAN transfer
transfer rate 10 Mbit/s (or no
connection)
transfer rate 100 Mbit/s
transfer rate 1000 Mbit/s
®
6321
®
23