Fujitsu D2932 Техническое руководство - Страница 15
Просмотреть онлайн или скачать pdf Техническое руководство для Материнская плата Fujitsu D2932. Fujitsu D2932 32 страницы. For rx330 s1
Печатать страницуFeatures
3.2
Main memory
The system board supports up to 32 Gbyte main memory. 8 slots (4 banks with
2 modules) are available for the main memory. Each memory bank can be
populated with 512 Mbyte (only D2440), 1 Gbyte, 2 Gbyte or 4 Gbyte ECC
DDR2 SDRAM memory modules.The maximum main memory is 16 Gbyte for
installation with one CPU and 32 GByte with two CPUs.
D2440
ECC DDR2-533 (PC4300) or ECC DDR2-667 (PC5300)
D2932
ECC DDR2-800 (PC6400)
ECC with memory scrubbing is supported.
I
You will find the descriptions how to install memory modules in the
Options Guide of your server.
Module population
Figure 2: Main memory
– If the memory modules are populated in pairs, each pair must consist of
identical memory modules (2-way interleaved mode)
– The module capacity between pairs can differ: pair 2A/2B can be populated
with two 1 GMbyte modules and pair 1A/1B with two 2 Gbyte modules.
– CPU 2 must be installed to access DIMM3A/3B and DIMM4A/4B.
D2440/D2932 (RX330 S1)
CPU 2
DIMM4A
DIMM4B
DIMM3A
DIMM3B
Technical Manual
Main memory
DIMM1B
DIMM1A
DIMM2B
DIMM2A
CPU 1
15