Fujitsu D3012 Краткое описание - Страница 28

Просмотреть онлайн или скачать pdf Краткое описание для Материнская плата Fujitsu D3012. Fujitsu D3012 31 страница.

6 - English

Installing/removing main memory

Technical data

Technology

Total size

Module size

A current list of the memory modules recommended for this mainboard is available

on the Internet at: "http://ts.fujitsu.com/mainboards".

At least one memory module must be installed. Memory modules with different

memory capacities can be combined.

You may use only unbuffered 1.5 V memory modules without ECC.

DDR3 memory modules must meet the PC3-6400U or PC3-8500U speciﬁcation.

If you use more than one memory module, then make sure to distribute the

memory modules over both memory channels. By doing this you use the

performance advantages of the dual-channel mode.

Maximum system performance is achieved when identical memory modules

are used in Channel A and Channel B.

To simplify equipping, the slots are colour coded.

With a memory conﬁguration of 16 GB, the visible and usable main memory may

be reduced to 15 GB (depending on the system conﬁguration).

Slot to be used

Channel A, slot 1

Channel B, Slot 2

Channel A, slot 3

Channel B, Slot 4

The installation/removal is described in the "Basic information on mainboard" manual.

DDR3 800 / 1600 unbuffered DIMM modules 240-Pin; 1,5 V; 64 Bit,

no ECC

1 GB to 16 GB

1024, 2048 or 4096 MB per module

slot 4

slot 3

Channel B

Channel A

Number of memory modules inserted

Installing/removing main memory

slot 2

slot 1

Fujitsu Technology Solutions