Fujitsu GA-7VAXFS Руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Руководство пользователя для Материнская плата Fujitsu GA-7VAXFS. Fujitsu GA-7VAXFS 47 страниц. Amd athlon/athlon xp/duron socket a processor motherboard
Печатать страницу
Step 2: Install memory modules
The motherboard has 3 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
Support Unbuffered DDR DIMM Sizes type:
64 Mbit (2Mx8x4 banks)
128 Mbit (2Mx16x4 banks)
512 Mbit (16Mx8x4 banks)
DDR
When RAM_LED is ON, you do not install / remove DDR from socket.
Please note that the DIMM module can only fit in one direction due to the two
notches. Wrong orientation will cause improper installation. Please change
the insert orientation.
When using double sided DDR266 modules, only a maximum of 2 sockets
can be populated. The 3rd socket has to be free.
GA-7VAXFS Motherboard
64 Mbit (1Mx16x4 banks)
256 Mbit (8Mx8x4 banks)
512 Mbit (8Mx16x4 banks)
1. The DIMM socket has a notch, so the DIMM
memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the
DIMM socket. Then push it down.
3. Close the plastic clip at both edges of the DIMM
sockets to lock the DIMM module.
Reverse the installation steps when you wish to
remove the DIMM module.
- 12 -
128 Mbit (4Mx8x4 banks)
256 Mbit (4Mx16x4 banks)