Fujitsu MB91460 SERIES Начало работы - Страница 32

Просмотреть онлайн или скачать pdf Начало работы для Материнская плата Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 41 страница. 32-bit microcontroller
Также для Fujitsu MB91460 SERIES: Руководство пользователя (45 страниц), Примечание по применению (23 страниц), Примечание по применению (26 страниц), Примечание по применению (29 страниц), Примечание по применению (29 страниц)

Chapter 7 Setup / Change Connection PC – Emulation System

7 Setup / Change Connection PC – Emulation System

This chapter describes who to establish the connection between PC and emulation system.

The emulator MB2198-01 offers three possibilities to program and to debug a device,

namely via

Serial connection

USB

LAN

In the template for the 91V460 all three connection types are already preconfigured, but for

some device additional settings have to be made.

The emulator MB2198-01 offers the possibility to program and debug a device via a serial

connection. Even though this is a very easy to install connection, the transmission speed is

very slow.

The default setting for debugging via a serial connection is COM 1 and a baud rate of

115200 Baud.

7.2.1 Overview

The emulator MB2198-01 is provided with a USB port that can be used to program and

debug a device. No additional hardware connection is required for this purpose

To operate the emulator MB2198-01 on the PC, the USB-Drivers of the PC have to be

updated. The following procedure describes the update-process.

1. Connect the USB-Cable to the emulator MB2198-01 and to the PC. Connect the 16 V

DC power supply to the port 'DC in' and to 230 V. Please, be aware, that the

emulator is switched off. Also refer to Figure 2.

2. After the PC is booted, power up the emulator. Windows will register a new hardware

component and will start the hardware wizard. Select the option 'No, not this time' to

search the drivers manually and press 'Next'.

MCU-AN-391005-E-V17

Getting Started

- 32 -