Fujitsu SK-8FX-TSC-32PMC Руководство пользователя - Страница 20

Просмотреть онлайн или скачать pdf Руководство пользователя для Материнская плата Fujitsu SK-8FX-TSC-32PMC. Fujitsu SK-8FX-TSC-32PMC 28 страниц.

4 Connectors

A standard USB B-mini type connector can be used for power supply and for communication

with a host PC via the on-board serial-to-usb converter. A USB cable is included.

All pins of the microcontroller are directly connected to pin headers. The pin marking next to

the connector reflects the pin number of the microcontroller.

A 10-pin header is provided to connect an MB2146-08-E BGMA adapter (not included) for

Flash memory programming and debugging.

Please be sure of correct orientation of the BGMA adapter on X2 before powering up the

system. Pin 1 (marked on the ribbon cable and connector of the BGMA adapter) must be

located at the outer edge of the PCB.

Jumper JP2 must be opened when using the BGMA adapter, otherwise an error message

will be displayed.

When powering up, please follow the order given below:

1. Connect BGMA adapter to the SK-8FX-TSC-32PMC.

2. Connect BGMA adapter to host USB port (LED on BGMA adapter should be green)

3. Power up the SK-8FX-TSC-32PMC (LED on BGMA adapter should turn orange)

Pin Number

Pin Signal

UVCC

RSTIN

RSTOUT

Reserved

For details about the BGMA usage, please refer to the application notes included (on CD).

FMEMCU-UG-90003-10

SK-8FX-TSC-32PMC User Guide

Chapter 4 Connectors

Description

VCC of target system, used to detect target power status

GND

Target system GND

Reset input (from BGMA to MCU)

Reset output (from target system to BGMA)

DBG

Single-wire Debug Pin

Table 4-1: BGMA Connector Signals

- 20 -