Indesit EVO 2 Laundry Информация о сервисе - Страница 2

Просмотреть онлайн или скачать pdf Информация о сервисе для Стиральная машина Indesit EVO 2 Laundry. Indesit EVO 2 Laundry 39 страниц.

SAFETY NOTES & GENERAL SERVICING ADVICE

1. This manual is NOT intended as a comprehensive repair/maintenance guide to the appliance.

2. It should ONLY be used by suitably qualified persons having technical competence applicable

product knowledge and suitable tools and test equipment.

3. Servicing of electrical appliances must be undertaken with the appliance disconnected (unplugged)

from the electrical supply.

4. Servicing must be preceded by Earth Continuity and Insulation Resistance checks.

5. Personal safety precautions must be taken to protect against accidents caused by sharp edges on

metal and plastic parts.

6. After servicing the appliance must be rechecked for Electrical Safety. In the case of appliances which

are connected to a water supply (i.e.: Washing Machines, Dishwashers & Food Centres etc.) checks

must be made for leaks from seals gaskets and pipe work and rectification carried out where

necessary.

7. It can be dangerous to attempt 'DIY' repairs / maintenance on complex equipment and the Company

recommends that any problem with the appliance is referred to its own Service Organisation.

8. Whilst the Company has endeavoured to ensure the accuracy of the data within this publication they

cannot hold themselves responsible for any inconvenience or loss occasioned by any error within.

9. This appliance may be fitted with a '3 phase' motor which uses a different type of power

module.

This power board is fitted with a large aluminium heat sink which remains live after the power

is disconnected.

Under no circumstances should the board be removed under the time shown below in Fig 1.

Alternative 'quick methods' of discharging the board SHOULD NOT be used or attempted.

IMPORTANT SAFETY NOTE

Risk of Electric Shock

The metal heatsink fitted on the

Power Module may hold an

electrical charge for a short period

after switching off the machine.

Allow 5 minutes after

disconnecting the machine from

the electrical supply before

commencing ANY work.