Indesit XH8 Series Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Холодильник Indesit XH8 Series. Indesit XH8 Series 8 страниц.
Печатать страницу
SHELVES:
GB
Due to the special guides the shelves are removable and the
height is adjustable allowing easy storage of large containers
and food. Height can be adjusted without complete removal of
the shelf. (see diagram),
2
1
TEMPERATURE Indicator light
the refrigerator.
1. Check that OK appears clearly on the indicator light (see
diagram).
2. If the word "OK" does not appear it means that the temperature
is too high:set the FRIDGE TEMPERATURE on a colder value,
and then wait 10 hours until the temperature becomes stable.
3. Check the indicator light again: if necessary, readjust it
following the initial process. If large quantities of food have
been added or if the refrigerator door has been opened
frequently, it is normal for the indicator not to show OK. Wait
at least 10 hours before you set the FRIDGE temperature on
a colder value.
Using the freezer to its full potential
• Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24
hours).
• Fresh food for freezing should not be placed in contact with
the one already frozen; it should be placed in the lower
FREEZER and STORAGE compartment that provides the best
freezing rate.
• To freeze fresh food in the best and safest way possible,
activate the SUPER function 24 hours before placing the
food in the freezer. After placing the food inside, activate the
SUPER function again; it will be deactivated automatically
after 24 hours;
• Do not place glass bottles which contain liquids, and which are
corked or hermetically sealed in the freezer because they could
break.
• The maximum quantity of food that may be frozen daily is
indicated on the plate containing the technical properties
located on the bottom left side of the refrigerator compartment
(for example: 2Kg/24h ).
! To avoid blocking the air circulation inside the freezer
compartment, it is advisable not to obstruct the ventilation
holes with food or containers.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer
door. This will help maintain the temperature inside the
freezer, ensuring that foods are conserved for at least 12-18
hours.
! To get more space inside your freezer, you can take out any
6
*
: to identify the coldest area in
drawers (and flaps, if appropriate), from their slots, by putting
your food directly on the provided shelves.
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect
the appliance from the electricity supply:
1. Press the ON/OFF button to turn off the device
2. pull the plug out of the socket
Cleaning the appliance
• The external and internal parts, as well as the rubber seals
may be cleaned using a sponge that has been soaked in
lukewarm water and bicarbonate of soda or neutral soap. Do
not use solvents, abrasive products, bleach or ammonia.
• The removable accessories may be soaked in warm water
and soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner set
on medium power. The appliance must be switched off and
the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
and to prevent the formation of stains, food must always be
covered or sealed properly.
• If you want to switch the appliance off for an extended period
of time, clean the inside and leave the doors open.
Replace LED * light
The LED lighting, thanks to the powerful diffused light, allows
a clear view of each food. If you need to replace the LED light,
contact the Technical Service.
Replacing the light bulb *
To replace the light bulb in the refrigerator compartment, pull out
the plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power
range indicated on the cover.
3