Indesit LFT 116 A/HA Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Посудомоечная машина Indesit LFT 116 A/HA. Indesit LFT 116 A/HA 26 страниц. Platform eos. built in

Indesit LFT 116 A/HA Руководство по эксплуатации

2.3: GENERAL TECHNICAL DATA

Capacity
Dimensions
Width
Height
Depth
Water Supply Connections
Maximum pressure
Minimum pressure
Electric Connections
Power strength
Minimum pressure

CHAPTER 3: INSTALLATION OF PRODUCT

Select the site where the dishwasher is to be set up; it can also be set up having the back or side-panels against other furniture or
against the wall.Thedishwasher is supplied with charging-and-disfill up-pipes, that can be adjusted to the left or to the right to ease
the setting up.

HEIGHT ADJUSTMENT

Introduce the dishwasher in the space and adjust the height by means of the central screw for the rear part and the fore-feet for
the front part of the machine. By means of a screw-driver, turn the screw clockwise or anti clockwise in order to increase or reduce
the height.
LEVELLING
Once the dishwasher has been positioned, adjust the feet by either fastening or unfastening them according to the height
required, and proceed to level them out so that th machine is well fixed to the floor. Ensure that its inclination angle does not
exceed more than 2 degrees. This will ensure a correct functioning of the product.

COLD-WATER SUPPLY CONNECTION

Connect the incoming cold-water pipe. Should the pipes be brand new or not have been used for a certain period of time, it is
recommended to allow the water to flow through till it comes out clean. Such precautionary-measures will prevent probable
water-blockage and damage to the dishwasher.
Service Manual
Manual LFT 114 - 116 - 216
TECHNICAL DATA
EU
12 Standard Covers
59,5 cm
82 cm
57 cm
10 bars
0,5 bars
220/230 Volt/ 50 Hz
1900 Watts
Edition
2007.10.15
5
UK
12 Standard Covers
59,5 cm
82 cm
57 cm
10 bars
0,5 bars
220/240 Volt 50 Hz
1900 Watts
Language
English