Indesit FID20 Инструкция по установке и использованию - Страница 36

Просмотреть онлайн или скачать pdf Инструкция по установке и использованию для Печь Indesit FID20. Indesit FID20 44 страницы. Electric built in double oven

Печатать страницу

Care and Cleaning

3. OVEN DOORS

CONTROL PANEL

TRIMS

4. REPLACEMENT OF THE OVEN LAMP

MAIN OVEN LAMP

5. HOW TO CLEAN THE LAMP LENS

MAIN OVEN LAMP

(a) Control Panel

Regularly wipe with a clean, damp cloth and polish with a

clean, dry cloth.

(b) Trims

It is advisable to clean the trims regularly to prevent any

build up of soiling which may detract from the appearance of

the cooker. The recommended method of cleaning is to wipe

over the trims with a clean, soft cloth wrung out in warm

water, or mild non abrasive cleaner.

(If in doubt try the cleaner on a small area of trim which is

OVEN

DOORS

not noticeable in normal use), then after wiping with a cloth

wrung out in clear water, dry with a clean, soft cloth.

Open the door fully. The glass panel may now be washed.

Stubborn stains can be removed by using a well soaped, fine

steel wool soap pad.

(d) Stainless Trims (SS models only)

Regularly wipe with a clean, damp cloth and polish with a

clean dry cloth.

DO NOT use scouring pads, or abrasive powder, which will

scratch the glass.

Warning: To avoid electric shocks - please ensure that the

electricity supply to the appliance is switched off and the

appliance is fully cold, before removing lamp lens.

Open the oven door and remove the oven shelves.

Using a thick cloth, grip the lamp lens, unscrew anti-

clockwise and remove the lens.

Carefully unscrew the bulb anti-clockwise. Fit replacement

bulb (15W 300°C SES). Fit replacement bulb and refit lens.

Warning: To avoid electric shocks - please ensure that the

electricity supply to the appliance is switched off and the

appliance is fully cold, before cleaning lamp lens.

Open the oven door and remove the oven shelves.

Using a thick cloth, grip the lamp lens, unscrew anti-

clockwise and remove.

Clean with a non-abrasive cleansing cream and refit

lamp lens.

DO NOT use scouring pads, or abrasive powder, which will

scratch the glass lens