Indesit I6GG1G/UA Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Печь Indesit I6GG1G/UA. Indesit I6GG1G/UA 36 страниц. Cooker and oven

Печатать страницу

Start-up and use

Using the hob

Lighting the burners

For each BURNER knob there is a complete ring

showing the strength of the flame for the relevant

burner.

To light one of the burners on the hob:

1. Bring a flame or gas lighter close to the burner.

2. Press the BURNER knob and turn it in an

anticlockwise direction so that it is pointing to the

maximum flame setting .

3. Adjust the intensity of the flame to the desired level

by turning the BURNER knob in an anticlockwise

direction. This may be the minimum setting , the

maximum setting  or any position in between the two.

If the appliance is fitted with an electronic lighting

device* (C), press the ignition button, marked with the

knob is released. If this occurs, repeat the operation,

holding the knob down for a longer period of time.

! If the flame is accidentally extinguished, switch off the

burner and wait for at least 1 minute before attempting

to relight it.

If the appliance is equipped with a flame failure safety

device (X)*, press and hold the BURNER knob for

approximately 2-3 seconds to keep the flame alight

and to activate the device.

To switch the burner off, turn the knob until it reaches

•.

the stop position

Flame adjustment according to levels

the burner flame intensity can be adjusted with the

knob according to 6 power levels, from maximum

to minimum with 4 intermediate positions:

a click will indicate the change from one level to

another when turning the knob. The system

guarantees a more precise adjustment, allows

to replicate the flame intensity and to identify

easily the preferred level for different cooking

operations.



symbol

, then hold the

BURNER knob down and

turn it in an anticlockwise

direction, towards the

maximum flame setting,

until the burner is lit.

The burner may be

extinguished when the

Practical advice on using the burners

For the burners to work in the most efficient way

possible and to save on the amount of gas consumed, it

is recommended that only pans that have a lid and a flat

base are used. They should also be suited to the size of

the burner.

To identify the type of burner, please refer to the

diagrams contained in the "Burner and nozzle

specifications".

! On the models supplied with a reducer shelf,

remember that this should be used only for the auxiliary

burner when you use casserole dishes with a diameter

under 12 cm.

Using the oven

! The first time you use your appliance, heat the empty

oven with its door closed at its maximum temperature

for at least half an hour. Ensure that the room is well

ventilated before switching the oven off and opening

the oven door. The appliance may emit a slightly

unpleasant odour caused by protective substances

used during the manufacturing process burning away.

! Before operating the product, remove all plastic film

from the sides of the appliance.

! Never put objects directly on the bottom of the oven;

this will avoid the enamel coating being damaged.

Only use position 1 in the oven when cooking with the

rotisserie spit.

Lighting the oven

To light the oven burner, bring

a flame or gas lighter close to

opening F (see figure) and press

the OVEN control knob while

turning it in an anticlockwise

direction until it reaches the MAX position.

If the appliance is fitted with an electronic lighting

device*, press the ignition button, marked with the



symbol

, then hold the OVEN control knob and

turn it in an anticlockwise direction, towards the MAX

position, until the burner is lit. If, after 15 seconds, the

burner is still not alight, release the knob, open the

oven door and wait for at least 1 minute before trying to

light it again. If there is no electricity the burner may be

lit using a flame or a lighter, as described above.